Pentair Clean & Clear Cartridge Filter75sqft | EC-160315
Compact fiberglassreinforced cartridge pool filter from Pentair (SKUEC-160315) with 75sqft media area, coreless cartridge, and 2 plumbing fittings for strong flow.
Features
- 75sqft of cartridge media for efficient filtration in smaller pool systems.
- Durable fiberglassreinforced, chemicalresistant polypropylene tank body.
- Coreless cartridge design allows easy removal and rinsingno backwash required.
- 2 plumbing ports support higher flow and reduce restriction for common pump setups.
- High Flow manual air relief valve and continuous internal air relief maintain top performance.
- Lockring lid with safety latch provides toolfree access for servicing.
The Pentair Clean & Clear Cartridge Filter75 (SKUEC-160315) offers a highquality, compact filtration solution designed for smaller residential pools. With 75square feet of media, it provides a strong balance between size and performance. The tank is built from fiberglassreinforced polypropylene to handle pool chemicals and environmental stress, while the coreless cartridge simplifies cleaning and reduces water waste compared to backwashing systems. With 2inch plumbing connections and efficient air relief features, this filter supports strong flow and long service intervals. Ideal when you want clear water without oversized equipment.
Pro Tip
Verify that your pumps flow rate matches the capacity of this 75sqft filterif your flow exceeds ~7580GPM, the filter may reach cleaning intervals more frequently. Leave adequate clearance above the lid for easy cartridge access, and at servicing time, ensure the lockring is clean and lubricated for smooth operation.
Related Parts
- Pentair Clean & Clear Cartridge Filter100sqft | EC-160316
- Pentair Clean & Clear Cartridge Filter150sqft | EC-160317
- Pentair Clean & Clear Filter System Cartridge Element, 75 sq. ft. | R173214
Installation Tips
Highlevel safety/compatibility notes only: Shut off pump power and relieve system pressure before servicing or installing. Ensure the filter base is level and supports the tank plus water load. Confirm plumbing port size (2) and orientation match your existing setup. After installation, check and lubricate the lid Oring and ensure the clamp/lock ring is fully seated per the manufacturer’s torque guidelines.
